Check the output at your coldest temperature, not the rating at +8 °C. Our cold-climate VY-12 still delivers 9,100 Btu/h at −25 °C and keeps heating to −30 °C. The VY-24 delivers 15,000 Btu/h at −25 °C. All six models use R-454B refrigerant and run on 208/230 V. We supply the units; your installer installs them.
Model
Type
Heating at +8.3 °C (Btu/h)
At −15 °C
At −25 °C
Heats down to
SEER2
HSPF2 (Region V)
Container price per unit
VY-12S
Standard
12,600
9,100
6,680
−25 °C
24
8.6
$859
VY-12
Cold climate
12,000
12,000
9,100
−30 °C
25.0
9.0
$1,059
VY-18S
Standard
19,000
13,600
9,200
−25 °C
23
8.2
$1,049
VY-18
Cold climate
18,000
17,800
12,300
−30 °C
23.5
8.8
$1,249
VY-23S
Standard
25,000
18,600
13,800
−25 °C
23
8.2
$1,449
VY-24
Cold climate
24,000
22,400
15,000
−30 °C
22.5
8.6
$1,649
How to buy. Single units are sold out until the February 2027 container lands. Until then, every model is ordered through the next Container Run. Reserving is free; a binding order takes a 50% deposit, and the balance is due before release in Charlottetown. Pre-orders close 15 November 2026. Each model is sold in lots; the lot size is on its product page.
Questions we are asked
How cold can a VY Build heat pump heat?
The cold-climate VY-12, VY-18 and VY-24 heat down to −30 °C. The standard VY-12S, VY-18S and VY-23S heat down to −25 °C. The output at each temperature is on each product page, taken from the spec sheet.
Cold-climate or standard model?
Cold-climate models hold more of their output in deep cold: at −25 °C the VY-12 delivers 9,100 Btu/h and the VY-12S 6,680 Btu/h. If the unit is the only heat source in the room, choose a cold-climate model.
Which size do I need?
Size the unit to the room's heat loss at your coldest design temperature, not to the cooling load. Your installer's heat-loss calculation decides; compare it with the −25 °C column above.
Are the units certified?
Yes. The heating and cooling ratings are AHRI-certified, and the certificate number is printed on each unit's rating plate. Every buyer gets it in writing with the quotation, before the balance is due; just ask.
Do you install?
No. We supply the units. A licensed installer does the refrigerant and electrical work, and we can talk specs with your installer.
What warranty comes with the units?
Ten years on the compressor and five years on parts, when the unit is registered within 60 days at vybuild.ca/warranty-registration/.
Will it qualify for a rebate?
The federal heat pump rebate announced on 8 October 2026 is expected in early 2027, and its rules are not final, so we can't confirm eligibility yet. Provincial programs each keep their own equipment list; ask us about the model and we will check it against the current list.
Check the output at your coldest temperature, not the rating at +8 °C. Our cold-climate VY-12 still delivers 9,100 Btu/h at −25 °C and keeps heating to −30 °C. The VY-24 delivers 15,000 Btu/h at −25 °C. All six models use R-454B refrigerant and run on 208/230 V. We supply the units; your installer installs them.
How to buy. Single units are sold out until the February 2027 container lands. Until then, every model is ordered through the next Container Run. Reserving is free; a binding order takes a 50% deposit, and the balance is due before release in Charlottetown. Pre-orders close 15 November 2026. Each model is sold in lots; the lot size is on its product page.
Questions we are asked
How cold can a VY Build heat pump heat?
The cold-climate VY-12, VY-18 and VY-24 heat down to −30 °C. The standard VY-12S, VY-18S and VY-23S heat down to −25 °C. The output at each temperature is on each product page, taken from the spec sheet.
Cold-climate or standard model?
Cold-climate models hold more of their output in deep cold: at −25 °C the VY-12 delivers 9,100 Btu/h and the VY-12S 6,680 Btu/h. If the unit is the only heat source in the room, choose a cold-climate model.
Which size do I need?
Size the unit to the room's heat loss at your coldest design temperature, not to the cooling load. Your installer's heat-loss calculation decides; compare it with the −25 °C column above.
Are the units certified?
Yes. The heating and cooling ratings are AHRI-certified, and the certificate number is printed on each unit's rating plate. Every buyer gets it in writing with the quotation, before the balance is due; just ask.
Do you install?
No. We supply the units. A licensed installer does the refrigerant and electrical work, and we can talk specs with your installer.
What warranty comes with the units?
Ten years on the compressor and five years on parts, when the unit is registered within 60 days at vybuild.ca/warranty-registration/.
Will it qualify for a rebate?
The federal heat pump rebate announced on 8 October 2026 is expected in early 2027, and its rules are not final, so we can't confirm eligibility yet. Provincial programs each keep their own equipment list; ask us about the model and we will check it against the current list.