The prescriptive points path under Nova Scotia's Tier 2 code is where a lot of permit sets get stuck, and windows are usually the line that decides whether you clear the threshold or come up short. This is a numbers reference for builders, installers and designers working Part 9 residential in NS. No marketing, no rounding in our favour — just what a window has to put on paper to earn its points.
What Tier 2 actually asks for
Nova Scotia's adoption of NBC 2020 Tier 2 for Part 9 residential takes effect April 1, 2026. The prescriptive route is a points system: you need 10 points total across the building envelope and systems, and you assemble those points from a menu. Windows are one line on that menu, and they are one of the easier lines to move because the product itself carries the number — you are not re-detailing an assembly, you are specifying a unit.
The figures below come from the Cape Breton Regional Municipality's NS Building Code Tier 2 Prescriptive Path Guide (Nova Scotia Building Code Part 9 Residential, 2026). We publish them as they stand, including the gap between the two tiers, because the gap is the whole decision.
The two U-value thresholds, and the points each one earns
There are two fenestration steps worth knowing:
- Maximum U-value 1.44 W/m²K (minimum ER 29): 1.6 points.
- Maximum U-value 1.22 W/m²K: 4.6 points.
Both are measured out of the 10 points the path requires. That is the headline. The jump from 1.44 to 1.22 W/m²K is a 0.22 improvement in U-value, and it is worth three extra points — 4.6 instead of 1.6. In a 10-point budget, three points is a large fraction of the whole target, and it comes from a single product substitution rather than a framing change or a mechanical upgrade.
The weak spot first, as always: the 1.6-point window is not a bad window. A unit at U ≤ 1.44 and ER 29 is a real, code-passing double-glazed product. But if you are counting on fenestration to carry a meaningful share of your points, 1.6 does not go far, and you will have to find the rest of your points somewhere more expensive. The 4.6-point window is the one that lets the rest of the envelope breathe.
What the glass unit has to do to hit U ≤ 1.22
To land under 1.22 W/m²K on paper, a typical unit needs more than a thermal frame — it needs the glazing package built for it. In Atlantic Canada that generally means a triple-pane sealed unit, warm-edge spacers in place of aluminium spacer bar, and an inert gas fill (krypton is common where cavity width is tight, argon where it is not). Those three things together are what pull the centre-of-glass and the overall unit number down to the 1.22 band.
That is a product decision with a cost attached. Industry pricing for 2026 — from Kettle Contracting's Window Installation Cost in Canada guide, which references Atlantic province labour context — puts the premium for moving from a basic double-pane to a triple-pane unit with warm-edge spacers and krypton fill at roughly $150–$350 per window. Multiply that across a house and weigh it against the three points you buy. In most point budgets, fenestration is one of the cheaper points per dollar, which is why it tends to be the first line builders upgrade.
Documenting the spec at permit stage
Points are only real if the reviewer can see them. At permit, the window line needs the U-value in W/m²K (not the imperial U-factor, and not an R-value conversion), the Energy Rating (ER) where the 1.6-point step is being claimed, and the product reference the number belongs to. A certification without a certificate number behind it is not a claim a reviewer should accept, and it is not one we make either — we name the number or we leave it off.
Practical note from our side of the counter: the number on the manufacturer's data sheet is the whole-unit U-value for a specific size and configuration. A tilt-turn and a fixed unit of the same line do not carry the same number, and a small operable sash will read worse than a large fixed lite. Specify the number for the configuration you are actually installing, not the best one in the brochure.
Where this sits in the 2026 build pipeline
This matters more each year because the volume is there. CMHC's Summer 2025 Housing Market Outlook projects multi-unit construction will stay elevated by historical standards, with Atlantic Canada among the regions expected to hold strong construction levels. More units under Tier 2 means more permit sets where the fenestration line has to be right the first time. Getting the window number sorted early keeps the points math stable through the rest of the design.
For retrofit work, the federal Canada Greener Homes Loan offers an interest-free loan of up to $40,000 for energy-efficient retrofits — worth checking current eligibility windows before you quote it to a client, as program terms change.
How we fit in
We are a supplier, not a builder — we sell to the people who build. On the aluminium side, our MB-70HI high-insulation 70mm aluminium window takes the standard MB-70 profile and adds the HI thermal break, which is the frame technology that helps a glazing package reach the lower U-value band. You can read the full spec on the MB-70HI aluminium window page. When we quote a window, we give you the U-value for the configuration you are ordering, the certificate number behind it, and the manufacturer's warranty terms in writing before the purchase — not after it. Our catalog is split two ways: project orders for windows and doors on a 6 to 8 week lead time, and off-the-shelf trade supply from the Charlottetown warehouse for the lines we stock.
Key Takeaways
- NS Tier 2 (Part 9 residential, effective April 1, 2026) uses a prescriptive points path requiring 10 points total.
- A window at U ≤ 1.44 W/m²K (min ER 29) earns 1.6 points; a window at U ≤ 1.22 W/m²K earns 4.6 points — a three-point jump for one product substitution (Cape Breton Regional Municipality Tier 2 guide, 2026).
- Hitting U ≤ 1.22 typically needs triple glazing, warm-edge spacers and inert gas fill; the triple-pane premium runs roughly $150–$350 per window (Kettle Contracting, 2026).
- Document U-value in W/m²K for the exact configuration you install, with the certificate number — not the best number in the brochure.
- The federal Canada Greener Homes Loan offers up to $40,000 interest-free for retrofits; verify current eligibility.
Talk numbers before you draw the set
If you are specifying windows for a Tier 2 permit and want the U-value for the exact size and configuration you are installing — plus the certificate number behind it — send us the schedule. One importer, one contact, and the actual number before you commit. Reach us through vybuild.ca.

